ADX-8000 Specifications

Switch Type Layer 2 Ethernet, High-performance
Management Internal microcontroller, Front panel trunking control.
Switch Copper Ports Eight 100baseT. Auto-MDIX
Copper Port DC Power 48 volts on Spare Pairs configured for ADX-120/140
Copper Port Connectors Industry-standard RJ45, gold contacts
Fiber Ports Four. Gigabit Ethernet Bidrectional
Fiber Port Interface Standard SFP fiber modules (internal)
Fiber Length Supported Depends on SFPs installed. Typically 10 to 20 kilometers
Fiber Type Depends on SFPs installed. Normally single-mode bidrectional
Fiber Strands Required One for operation, a second for redundancy if desired
Fiber Connectors Industry-standard ST type
Power Requirements, AC Line 90-250 VAC, 50-60 Hz Power 10 - 200 watts depending on load
Power Requirements, DC Auxilliary 40-50 VDC Current 0.25 Amp to 5.0 Amp depending on load
Dimensions 1.75" High (1RU) x 19" Wide x 9" Deep
Weight Approximately 5 lbs