ADX-2400N Specifications

Local Input Channels 24 Balanced Analog. +4dBv Nominal, +24dBv Maximum. 3 X D-25F Connectors
Input Impedance Approx. 25K Ohms, Balanced to Ground
Local Output Channels 24 Balanced Analog. +4dBv Nominal, +24dBv Maximum. 3 X D-25F Connectors
Output Impedance Approx. 100 Ohm, Active Differential, Balanced to Ground
THD+Noise Less than 0.01% Input to Output or through Audio Network
Signal-to-Noise Ratio Greater than 100dB below peak level, bandwidth-limited to 25KHz
A/D and D/A Conversion 24-bit, 48KHz
Digital Processing and Delay 24-Bit Uncompressed, 48KHz
Audio Network Format Cobranet-100base/T Ethernet.     Dante-Gigabit Ethernet
Network TX/RX Capability 24 Channels Transmit and 24 Channels Receive Simultaneously
Level Adjustment Range -Infinity (off) to +12dB relative to Unity
Adjustable Delay Range 0 Milliseconds to 680 Milliseconds (>20 Video Frames), Each Output Independently-Adjustable (not available in Announce Booth mode)
Minimum Delay (Local In/Out) 0.65 Milliseconds
Headphone Jack 1/4" TRS, Stereo, Low-Impedance. HP and meter follow output selection
VU Meter Conventional VU Ballistics (300ms). -20 to +3.5 dB Scale
Power Requirements 95 to 250 Volts AC, 50-60Hz. 20 Watts
Cabinet Dimensions 1.75" High, 19" Wide, 15" Deep. (1 Rack Unit). 44.5mm X 482.6mm X 381mm