lance_design_txt_r1_c1.gif (15903 bytes) lance_design_txt_r1_c3.gif (78919 bytes)
lance_design_txt_r2_c1.gif (2096 bytes)     ADX-2400N [ANALOG I/O]  SPECIFICATIONS


Back to ADX-2400  
Main Page
  

Back to ADX-2400N Page  

Local Input Channels 24 Balanced Analog.  +4dBv Nominal, +24dBv Maximum.  3 X D-25F Connectors.
Input Impedance Approx. 25K Ohms, Balanced to Ground.
Local Output Channels 24 Balanced Analog. +4dBv Nominal, +24dBv Maximum.  3 X D-25F Connectors.
Output Impedance Approx. 50 Ohm, Active Differential, Balanced to Ground.
THD+Noise <0.02% Input to Output or through Audio Network
Signal-to-Noise Ratio >100dB below peak level, bandwidth-limited to 25KHz.
A/D and D/A Conversion 24-Bit, 48KHz
Digital Processing and Delay 24-Bit Uncompressed, 48KHz
Cobranet Transmission Format 20-Bit Uncompressed, 48KHz
Audio Network Format 100base/T Ethernet.   Industry-standard Cobranet format.
Cobranet TX/RX Capability 24 Channels Transmit and 24 Channels Receive Simultaneously.
Level Adjustment Range -Infinity (off) to +12dB relative to Unity
Adjustable Delay Range 0 Milliseconds to 680 Milliseconds (>20 Video Frames), Each Output Independently-Adjustable.
Minimum Delay (Local In/Out) 1.5 Milliseconds
Minimum Delay Through Network 6.5 Milliseconds (Normal Mode).  3.5 Milliseconds (Low-latency Mode)
Headphone Jack 1/4" TRS, Stereo, Low-Impedance
VU Meter Conventional VU Ballistics (300ms).  -20 to +3.5 dB Scale.  Meter and Headphone Jack follow Output Selection
Power Requirements 95 to 250 Volts AC, 50-60Hz.  20 Watts
Cabinet Dimensions 1.75" High, 19" Wide, 15" Deep.  (1 Rack Unit).   44.5mm X 482.6mm X 381mm

©2008 Lance Design