|
ADX-800 DUAL POWER SUPPLY
The ADX-800 Dual Power Supply provides 48-volt DC power for up to eight ADX-120 Announce Units
via the Cat5 Ethernet cable. It may also be used to supply power to the ADX-140 XLR Interface
units, instead of or in addition to the AC power input on those units.
The supply has fully-redundant load-sharing power supplies for
maximum reliability. Should either supply fail, a fault indication is provided on the front panel.
The ADX-800 is a 1RU unit which provides the following features:
Power for up to eight ADX-120 Announce Units with full complement of IFB/PL beltpacks.
May be used to provide redundant power to ADX-140 XLR Interface Units.
Fully-redundant load-sharing power supplies with fault indication.
Ultra-high efficiency switching supplies for low heat generation. No fans are required.
Each powered connection is individually protected against overcurrent or shorts, with LED monitoring.
Wide input voltage range, 95-250 Volts, 50 or 60 Hz.
An external 24-to-48 volt DC input is provided for battery operation.
Compact and light weight. One rack unit x 9" Deep. Weight approximately 5 lbs.
|
